US Dental Depot Blog
Wholesale Dental Supplies — News, Product Launches & Clinical Guides
Showing results for USDD · clear
-
Ten Questions That Separate a Distributor From a Box Shipper
Part 6 of 6 in the USDD Buyer's Guide Series. You interact with the machine once. You interact with the supplier for years. Apply this test to us as readily as to anyone else.
Read article → -
Most Sintering Complaints Are the Program, Not the Furnace
Part 5 of 6 in the USDD Buyer's Guide Series. Run a 4Y multilayer on a 3Y profile and you get the shrinkage you expected with translucency you did not. The chamber holds temperature; the program decides the restoration.
Read article → -
Open STL or Their Portal: The Scanner Question That Costs the Most
Part 4 of 6 in the USDD Buyer's Guide Series. Five microns on a calibration body is a real number and a nearly useless one. The question that decides long-term cost is whether the output is open.
Read article → -
Why Print Speed Is the Wrong Number on a 3D Printer Spec Sheet
Part 3 of 6 in the USDD Buyer's Guide Series. Print speed is quoted on the simplest geometry at the thickest layer setting. What decides a printer is cost per part fully loaded.
Read article → -
Wet, Dry, or Both: How Case Mix Decides Your Milling Unit
Part 2 of 6 in the USDD Buyer's Guide Series. Wet, dry or both is not a preference. It is a case-mix decision, and buying for work you hope to win in two years is how equipment ends up underused.
Read article → -
The Three Numbers to Write Down Before You Buy Any Dental Equipment
Part 1 of 6 in the USDD Buyer's Guide Series. Buyers start by comparing products. That is the third step, not the first. Establish these three numbers before you open a single spec sheet.
Read article → -
Six Free Buyer's Guides for Dental Labs and Clinics
Six free PDF guides covering milling units, 3D printers, intraoral scanners, sintering furnaces, and how to evaluate a distributor. Each includes a blank three-year cost-of-ownership table you can take to any vendor.
Read article → -
Setup Time Is the Hidden Cost in Metal Milling
Auto-calibration from 40 minutes to under 10, zero-point change in 1-2 seconds, and 398 Ncm of torque for CoCr and titanium. Where the DEPRAG W5 Pro separates from the W5.
Read article → -
Bringing Titanium and Premilled Abutments In-House
Implant work is the highest-margin milling a lab can do and the one most often outsourced. A wet machine rated for titanium and premilled abutments changes that calculation.
Read article → -
Consolidating Wet and Dry Onto One Floor-Standing Mill
A switchable wet/dry 5-axis machine with a 21-position tool changer covers zirconia through metal on a single platform. Where that consolidation pays, and where it does not.
Read article → -
Your First 5-Axis Mill Under $13,000: What to Check Before You Buy
An entry price is only entry if the machine is open. Closed CAM, proprietary discs and manual tool changes are where cheap mills get expensive.
Read article → -
When to Step Up to a Blank Changer: Reading the CORiTEC 250i
Automatic blank changing plus wet-and-dry titanium capability is a different tier of machine. Here is the volume and case mix that justifies the jump.
Read article → -
Unattended Overnight Milling: What an 8-Slot Disc Changer Is Worth
A disc changer does not mill faster. It mills longer. Manufacturer figures put automatic disc change at roughly 1.6x the capacity of manual loading.
Read article → -
One Machine for Every Material: The Case for a Dry-and-Wet Bench Mill
Running two mills means two maintenance schedules and two idle machines. A combined dry/wet platform with a dual tool magazine covers soft materials through metal without a needle change.
Read article → -
Same-Day Glass Ceramic: Batch Milling 20 Blocks in One Load
Glass-ceramic work is won or lost on turnaround. A 20-position super holder changes the math from one crown at a time to a scan-to-seat batch in about 4 hours.
Read article → -
What a Compressor Really Costs Your Lab, and How the UP3D P55D Removes It
Compressed air is a hidden line item: the unit, the install, the noise, the moisture traps, the service. An air-free 5-axis dry mill deletes all of it.
Read article → -
Dry Milling for a Growing Lab: Where the UP3D P53 Fits
A 5-axis dry mill that handles both discs and blocks, with 10-second material changes. Here is the case mix it covers and the point at which you outgrow it.
Read article → -
Welcome to the US Dental Depot Blog
News, product launches, and clinical guides for wholesale dental supplies — from US Dental Depot in Boca Raton, FL.
Read article →