LUXCreo Ilux Pro Dental — Complete Print-to-Polish Solution

What This Actually Is

This is not a printer. It is the entire appliance-production line — print, wash, cure, oven, resins, workflow software and a full year of AI design — specified by the manufacturer to work together. You unbox it, you produce a finished appliance. There is no second order, no compatibility research, and no third-party gear to blame when something does not fit.

That matters more than it sounds. The most common way an in-house printing project fails is not the printer — it is a practice that bought a printer, discovered it still needed a validated wash and cure step, bought those from somewhere else, and ended up with three vendors pointing at each other while the machine sits idle.

Why the Bundle, Not the Pieces

Every component below is sold separately on this site. You can click each one and check. Here is what the same configuration costs assembled piece by piece:

What Is In The Box

Ilux Pro Dental Printer

The printer itself, with build platform, LEAP-C+ and LEAP-X disposable cassettes, post-process and auxiliary tool kits. LEAP is Light-Enabled Additive Production — continuous printing tuned for the accuracy and surface finish dental appliances demand.

iLuxCure Pro

360° curing with upward and downward high-intensity lighting plus a heating function. Post-cure is not optional on a printed appliance — this is the step that makes it safe to seat.

iLuxWash Dental

Ultrasonic cleaning with a magnetic-driven impeller that agitates the solution, plus heating. The automatic cycle runs unattended and stops parts over-soaking, which is what warps them.

LuxOven Pro

Cuts the aligner and retainer end-to-end workflow from 3 hours to 2. That single hour is what moves the job from “call them back tomorrow” to same-day chairside delivery.

DCA Clear Aligner Resin, 0.5 kg

Direct-print aligner and retainer resin. High transparency, high accuracy. Aligners printed in DCA carry FDA Class II 510(k) clearance and completed CE IIA.

DMR III Model Resin, 1 kg

Fast-printing model resin with vertical printing, high toughness and wear resistance for ortho, restorative and implant models.

LuxFlow Basic

Production workflow in six steps — configure aligner thickness, gap and parameters, and have a print-ready model in minutes.

LuxDesign Pro FastTrack AI, 1 year

The AI layer that converts a raw patient scan into a printable device. An aligner, retainer or night-guard in under four minutes. The year included covers 200 retainers and 4,000 aligners.

Same-Day Is The Whole Point

A scan in the morning and an appliance seated the same afternoon is what changes the economics of a practice — case acceptance goes up when the patient does not leave and think about it, and the two-week lab loop stops setting your schedule. LuxDesign turns a scan into a printable device in under four minutes. LuxOven Pro takes the finishing chain from three hours to two. Those two numbers are what make same-day realistic rather than aspirational.

LUXCreo states it holds the first FDA 510(k) Class II clearance for direct-printed clear aligners, and that aligners printed in the included DCA resin carry that clearance and completed CE IIA. That is the manufacturer’s regulatory position — confirm current scope for your intended indication before building a protocol on it.

Will It Pay For Itself?

How It Compares

Every printer here is one we carry. Short version of our own Dental 3D Printers Compared 2026 guide.

Documentation

• The print-to-polish solution page
• Ilux Pro Dental — manufacturer product page
• Digital Polishing™ — how it works
• LUXCreo support centre
• All LUXCreo Printers, resins and parts at USDD