iLux Pro Dental 3D Printer
DLP printer on the LEAP™ platform. Prints up to 12 aligners in a single build.
DLP · LEAP™ platform · 12 aligners/build
$12,990.11 USD
USDD item #488813
Get a Quote
LUXCreo · direct-print aligners, retainers & splints
The iLux Pro is a DLP printer built on LUXCreo's LEAP™ platform for high-throughput dental production — not general-purpose prototyping. It anchors the first FDA-cleared 510(k) Class II direct-print aligner workflow, and prints up to 12 aligners in a single build. Sold and supported by US Dental Depot.
Six pieces make up the chain. The printer alone produces parts; the wash and cure stages are what make same-day, patient-ready appliances realistic.
DLP printer on the LEAP™ platform. Prints up to 12 aligners in a single build.
Automated cleaning for printed dental parts. Removes the manual alcohol bath step.
360° curing with upward and downward high-intensity light plus heating.
Drying stage that closes the print-wash-cure-dry loop on one benchtop.
Consumable resin tank for the iLux Pro. Keep a spare to switch materials without downtime.
Consumable resin tank for the Lux 3+ platform. Same swap-and-go workflow.
Prices shown are current US Dental Depot list prices at time of publication and exclude shipping, installation and applicable tax. Items shown as “Call for pricing” are configured per order.
Tell us the appliances you plan to produce and how many cases a month. We will quote the exact configuration you need — and tell you which pieces you can add later.
What separates the iLux Pro from a general-purpose resin printer is the validated chain around it — material, slicing, print, wash and cure cleared and tuned together.
The iLux Pro is a DLP printer built on LUXCreo's LEAP™ platform, engineered for high-throughput dental production rather than general-purpose prototyping.
LUXCreo's finishing technology delivers appliances up to 80% clearer than competitors and eliminates roughly 90% of hand-finishing time.
The first FDA-cleared 510(k) Class II direct-print aligner workflow. Clearance covers the DCA material and the printing process together.
Design in LuxDesign, prepare and slice in LuxFlow with one-click automation, then print. The automation is what keeps hands-on time down.
LUXCreo reports scan, design, print and deliver in under three hours when the full iLux Pro system runs in-clinic.
Aligners, dental and orthodontic models, retainers, splints, night guards, surgical guides, flippers and crowns from the same machine.
Performance figures for clarity, finishing time and workflow duration are as published by LUXCreo. Real-world results vary with case type, design and operator experience.
Manufacturer-published specifications only. Where LUXCreo does not publish a figure we leave the cell empty rather than estimate it — ask us and we will confirm with the factory.
| Specification | iLux Pro Dental | iLuxWash Dental | iLuxCure Pro |
|---|---|---|---|
| Role in the workflow | Wash | Cure | |
| Working volume | Up to 12 aligners per build | 158 × 158 × 148 mm 6.2 × 6.2 × 5.8 in | Φ200 × 200 mm Φ7.9 × 7.9 in |
| Unit dimensions | — | 200 × 488 × 418 mm 7.9 × 19.2 × 16.5 in | 320 × 361 × 460 mm 12.6 × 14.2 × 18.1 in |
| Weight | — | 21 kg (46.3 lb) | 20 kg (44.1 lb) |
| Light source | DLP · LEAP™ platform | — | 405 + 385 nm |
| Coverage | — | — | ≥ 95% with turntable |
| Max operating temp | — | ≤ 60°C (140°F) | ≤ 60°C (140°F) |
| Power | — | 100–120 VAC, 50/60 Hz, 600 W | AC 100–120 V, 50/60 Hz, 9 A |
| Operating environment | — | 22–32°C · RH < 80% | 22–32°C · RH < 80% |
| USDD item number | 488813 | 488819 | 488821 |
Em-dash (—) means the specification is not published for that unit or does not apply. US Dental Depot does not estimate specifications.
We will go back to the factory and get you the real number in writing rather than guess at it.
Honest trade-offs
Direct-print is a genuine step change for aligner and guard production. It also carries real constraints. Both are below.
Tell us what you produce today. If the iLux Pro is the wrong tool for your volume, we will say so.
Six common starting points and the configuration that fits each one.
Start with the full iLux Pro solution plus DCA. The FDA-cleared direct-print path is the reason to choose LUXCreo over a generic resin printer.
iLux Pro solution + DCAPrinter, wash and cure with DNG. One bottle covers a large run of guards and the Digital Polishing step removes most of the hand finishing.
iLux Pro + DNGPair the printer with DSG for guides and DMR III for the working models. High-accuracy chemistry for planned placement.
iLux Pro + DSG + DMR IIIRun the full stack and stock spare VATs so you can switch between aligner, guard and model resins without draining a tank.
Full stack + spare VATsStart with the printer and model resin. Add wash, cure and the aligner chemistry once your case volume justifies it.
iLux Pro + DMR IIISame hardware and same validated resin at every location means one training programme and predictable output across the group.
Full stack per siteSend us your monthly aligner, guard or model numbers and we will size the system to them.
The material is half the system. Each LUXCreo resin is validated against the iLux Pro workflow — the DCA aligner chemistry is the one covered by the FDA clearance.
Direct 3D printed aligner material. Clear, tough and biocompatible for patient comfort.
The same FDA-cleared aligner chemistry in the larger bottle for higher case volume.
Fast-printing transparent splint and night guard resin with superb abrasion resistance.
High-precision, high-accuracy material tailored for complex surgical planning and execution.
Dental and orthodontic model resin. Clear, accurate results with minimal finishing.
Reference dental models and print accessories supplied for system onboarding.
Factory pricing, factory warranty and a real serial-number trail. Not a grey-market box with no support behind it.
English and Spanish support from Boca Raton, Florida. We ship and support across the US and Latin America.
Printer, wash, cure, oven, resins, tanks and software from one invoice — and one number to call when you need help.
Tell us your case volume and appliance mix. We will quote the exact system, resins and spares you need.