GC America - GC G-Bond Universal Unit Dose Package, item 10042011: 50 single-use doses of light-cured universal dental adhesive with water-free AAA Technology plus 50 disposable applicator tips. No bottle cross-contamination. Flammable. - # 10042011
Earn up to 231 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
GC AMERICA
GC America · Universal Dental Adhesive
GC G-Bond Universal Unit Dose Package
SKU 496288 · GC America
GC G-Bond Universal Unit Dose Package (GC America item 10042011) is a light-cured, single-component Universal dental adhesive for enamel, dentin and indirect substrates, supplied as 50 single-use Unit doses. It is formulated with GC's water-free AAA Technology (Amphiphilic Amide monomer, Anhydrous composition, Adhesive monomers): there is no added water to evaporate, and GC publishes that bond strength to dentin is statistically unchanged whether maximum air, mild air or no air-blow is used. the adhesive contains 10-MDP and an integrated silane coupling agent, works with self-etch, selective-enamel-etch and total-etch techniques, bonds to zirconia, base metal, glass ceramics (after hydrofluoric-acid etching) and composite without a separate primer, and is also indicated as a resin infiltrant for non-cavitated, non-carious white-spot lesions. Source: GC America product page, brochure and IFU.
Key Features
- Unit-Dose format — 50 single-use doses, each with its own applicator tip; no bottle to open chairside and no bottle cross-contamination.
- water-free AAA Technology — amphiphilic amide monomer, anhydrous composition and adhesive monomers in one formulation; no added water to evaporate. GC states bond strength to dentin is statistically unchanged with maximum, mild or no air-blow.
- Minimal-solvent design — formulated with only the solvent needed for optimal wetting; air-drying is not a mandatory step.
- 10-MDP plus integrated silane coupling agent — chemical bonding to tooth structure, zirconia and base metals, and to glass ceramics and composite resin.
- Low film thickness — about 1 µm (maximum air) to about 8 µm (no air-blow), well below the 50 µm cement-gap threshold for indirect restorations (GC).
- Up to 7 minutes of working time after dispensing for multi-step procedures; protect the dispensed liquid from light.
- Nearly colorless, transparent adhesive for esthetic restorative work.
- All etching techniques — self-etch, selective enamel etch and total-etch.
- Expanded uses — immediate dentin sealing, intraoral repair, desensitizing, post cementation, and resin infiltration of non-cavitated, non-carious enamel lesions.
Indications for Use
Bonding substance between tooth surface and dental restorations. Areas of application:
- Direct bonding of restorative materials
- Bonding of dual-cured core build-up composites
- Adhesive cementation of indirect restorations
- Priming of the adherent surface of indirect restorations
- Intraoral repair of fractured restorations
- Treatment of hypersensitive teeth
- Sealing of tooth preparation (cavity or abutment) for indirect restorations
- Treatment of exposed root surfaces
- Micro-invasive treatment and infiltration of non-cavitated, non-carious enamel lesions
- Post cementation
Contraindications
- Direct pulp capping.
- Patients with known allergies to methacrylate monomer, methacrylate polymer or ethanol.
Directions for Use
I. Direct restorations
- Cavity preparation — prepare the tooth with standard techniques, making sure temporary material is thoroughly removed. Use rubber dam. Rinse and gently dry the prepared surfaces with an air syringe. For pulp protection use an approved material (e.g. calcium hydroxide).
- Treat tooth surfaces — choose one technique: (a) Self-etch: apply G-Bond Universal to bur-cut enamel and dentin with no separate etch step; always treat non-bur-cut enamel with 35–40% phosphoric acid gel for 10 s, rinse 5 s and dry gently. (b) Selective enamel etch: etch enamel only with 35–40% phosphoric acid gel for 10–15 s, rinse 5 s, dry gently. (c) Total-etch: etch enamel and dentin with 35–40% phosphoric acid gel for 10–15 s, rinse 5 s, dry gently.
- Application — Unit-Dose type: with the capsule top facing up, unscrew the cap counterclockwise. If the cap is too tight, use another Unit Dose — do not force it open, as liquid may spill and contact skin or eyes. IMMEDIATELY apply evenly to the prepared enamel and dentin with the disposable applicator. Air-drying is not mandatory: thin with the applicator brush or air syringe until a shiny film covers the area.
- Light cure with a visible-light curing Unit (times below).
- Place the composite — after light-curing the adhesive, follow the composite manufacturer's instructions. A dual-cured composite must also be light-cured separately; self-curing alone gives insufficient bond strength.
- Finish and polish with standard techniques.
Light-curing time
- Halogen / LED (700–1200 mW/cm²): 10 seconds with the light-guide tip within 10 mm; 20 seconds beyond 10 mm.
- High-power LED (more than 1200 mW/cm²): 5 seconds within 10 mm; 10 seconds beyond 10 mm.
Light-cure completely for an effective bond. Use a protective light shield or eye protection during curing. (GC IFU)
Notes
- After long-term refrigerated storage, let G-Bond Universal stand at room temperature for several minutes before use.
- Apply immediately after dispensing and protect the liquid from light.
- Remove excess material from the tooth (outside the surfaces to be bonded) with a sponge or cotton pellet before curing — residue is hard to remove after light-curing.
- If the applied material is contaminated with water, blood or saliva before curing, wash and dry the tooth and re-apply.
II. Indirect restorations
- Prepare the tooth and treat, apply and light-cure as in steps 1–4 above.
- Glass ceramics: etch the surface with hydrofluoric acid per the restoration manufacturer's instructions. Zirconia, aluminum oxide, metal, hybrid ceramics and composite: roughen the surface per the manufacturer's instructions, preferably by sandblasting.
- Apply G-Bond Universal to the restorative surface and apply the cement per its own instructions. with GC G-CEM ONE, light-curing the adhesive is not mandatory.
Storage
Refrigerate for long-term storage and allow to reach room temperature before use. Shelf life 24 months from manufacture. Flammable liquid (UN1133, Class 3, PG III) — ships by ground within the continental United States. Dental professional use only; permanent dentition.
Features, indications, directions and storage as published by GC America (IFU, brochure and product page). Always follow the current Instructions for Use.
What It Is For
the Unit Dose Package delivers the same water-free AAA adhesive in 50 individually sealed single-use doses, each with its own applicator tip, so no bottle is opened chairside and there is no bottle cross-contamination. What the adhesive is for:
- Direct bonding of light-cured and dual-cured composite restoratives and core build-up composites.
- Adhesive cementation and priming of indirect restorations (zirconia, base metal, glass ceramic, composite), and sealing of cavity or abutment preparations (immediate dentin sealing).
- Intraoral repair of fractured restorations.
- Treatment of hypersensitive teeth and exposed root surfaces.
- Micro-invasive infiltration of non-cavitated, non-carious enamel (white-spot) lesions.
- Post cementation.
Indications and item designation as published by GC America, the manufacturer.
Technical Specifications
BrandGC America
Product lineG-Bond Universal
Mfg #10042011
TypeLight-cured, single-component Universal adhesive
Technologywater-free AAA (Amphiphilic Amide monomer, Anhydrous composition, Adhesive monomers)
Functional monomers10-MDP, silane coupling agent, dimethacrylate
Composition (GC SDS)Dimethacrylate 35–45%, acrylamide 25–35%, silicon dioxide 10–20%, ethanol 1–10%, initiator 1–10%, 10-MDP 1–10%, silane 1–5%, stabilizer 1–5%
Etching modesSelf-etch, selective enamel etch, total-etch
Air-blow stepOptional — bond strength statistically unchanged with maximum, mild or no air (GC)
Film thicknessAbout 1 µm (maximum air) to about 8 µm (no air)
Working timeUp to 7 minutes after dispensing (protect from light)
AppearanceNearly colorless, transparent
Shelf life24 months from manufacture
Hazard classFlammable liquid — UN1133, Class 3, PG III; flash point 34 °C (93 °F); ships ground within the continental US
StorageRefrigerate for long-term storage; allow to reach room temperature before use
ContraindicationsDirect pulp capping; known allergy to methacrylate monomer/polymer or ethanol. Permanent dentition. Dental professional use only.
Availability3+ in stock or dropshipped today
USDD SKU496288
What's in the Box
- 50 × G-Bond Universal single-use Unit doses
- 50 disposable applicator tips
Contents as published by GC America (item 10042011). Package 100 × 120 × 145 mm.
Works with
Works with all etching techniques (self-etch, selective enamel etch, total-etch); light-cured and dual-cured composite resins and core build-up materials; resin cements including GC G-CEM ONE (light-curing the adhesive is optional in that combination); indirect substrates zirconia, base metal, glass ceramic (after HF etch) and composite. Cures with any visible-light curing Unit.
How it compares
| GC G-Bond Universal Unit Dose Package CURRENT | 3M Scotchbond Universal Plus | Kerr OptiBond Universal | Ivoclar Adhese Universal | |
|---|---|---|---|---|
| Brand | GC America | 3M | Kerr | Ivoclar |
| Adhesive type | Single-component Universal, light-cure | Single-component Universal, light-cure | Single-component Universal, light-cure | Single-component Universal, light-cure |
| Etching modes | Self-etch, selective-etch, total-etch | Self-etch, selective-etch, total-etch | Self-etch, selective-etch, total-etch | Self-etch, selective-etch, total-etch |
| Solvent system | water-free AAA Technology (minimal ethanol; air-blow optional) | Water / ethanol (air-thinning required) | Water / ethanol (air-thinning required) | Water / ethanol (air-thinning required) |
| Functional monomer | 10-MDP, silane | 10-MDP, silane | GPDM | MDP, MCAP |
| Indirect substrates | Zirconia, base metal, glass ceramic, composite | Zirconia, metal, glass ceramic | Zirconia, metal, glass ceramic | Zirconia, metal, glass ceramic |
Alternative-column values are as published by each manufacturer (vendor-claimed); confirm current specifications with each manufacturer before purchase. Brand names are trademarks of their respective owners.
Documentation
📄 G-Bond Universal Brochure (EN)📄 Instructions for Use (EN/ES/PT multi-language)📄 Safety Data Sheet (EN)Official GC America documents (brochure, IFU, SDS) hosted by US Dental Depot.
Video
G-Bond™ Universal: Direct Restorations — GC America.
AUTHORIZED DISTRIBUTOR
US Dental Depot is an Authorized GC America Distributor
Every GC America product we sell is a genuine, factory-fresh product, sourced through authorized channels and shipped from our US facility in Boca Raton, FL — with full US-based support.
Warranty & Guarantee
Manufacturer guarantee: GC warrants this product to be free from defects in materials and manufacture. Any product found defective is replaced per the manufacturer’s policy. as an authorized distributor, USDD facilitates replacement directly with the manufacturer.
Guarantee terms per GC. · GC.dental/america
Product description updated October 5, 2026
GC, G-Bond, G-ænial, G-CEM, Fuji and Initial are trademarks of GC. Other brand names are trademarks of their respective owners.
Attachments
Related Products
Talk to an expert
By submitting you agree to be contacted by US Dental Depot. We never share your details.