G-CEM ONE
Self-adhesive dual-cure resin cement. No separate primer for most indications, with an optional adhesive enhancing primer when the case needs more bond.
BUY G-CEM ONE →G-CEM ONE, G-CEM LinkForce and FujiCEM 2, self-adhesive resin, adhesive resin and resin-modified glass ionomer, covering every seating decision you make.
Pick by restoration, not by habit. FujiCEM 2 for metal, PFM and zirconia crowns with good retention form. G-CEM ONE self-adhesive where you want speed without a separate primer. G-CEM LinkForce when the case is retention-compromised, veneer-thin or all-ceramic.
Fuji PLUS remains for classic RMGI luting. Automix cuts waste versus hand mixing, and refills are priced separately from starter kits.
Each line is its own family on usdentaldepot.com, every shade, viscosity and pack size in one place. Pick the line, then the variant.
Self-adhesive dual-cure resin cement. No separate primer for most indications, with an optional adhesive enhancing primer when the case needs more bond.
BUY G-CEM ONE →
The adhesive cement for the hard cases - veneers, retention-compromised preps, all-ceramic. Full etch-and-bond protocol with G-Multi PRIMER, maximum bond strength.
BUY G-CEM LINKFORCE →Self-adhesive dual-cure in automix, positioned between the speed of a self-adhesive and the strength of a full adhesive protocol.
BUY G-CEM LINKACE →
Capsule delivery for consistent mix and no waste on single-unit seatings.
BUY G-CEM CAPSULES →
Resin-modified glass ionomer in paste-pak. Fluoride releasing, forgiving of a slightly damp field, and the pragmatic choice for metal, PFM and zirconia crowns.
BUY FUJICEM 2 →
The updated RMGI luting cement with improved handling and easier clean-up at the margin.
BUY FUJICEM EVOLVE →
Resin-reinforced glass ionomer luting cement, powder-liquid and capsules, for higher bond than conventional type 1.
BUY GC FUJI PLUS →
Classic type 1 luting glass ionomer. Thin film, low cost per seating, fluoride releasing.
BUY GC FUJI I →
Resin-based temporary cement with translucency for provisional veneers, and a set that releases cleanly at try-in.
BUY GC FUJI TEMP LT →
Eugenol-free temporary cement - important when the definitive restoration will be resin bonded, since eugenol inhibits resin polymerisation.
BUY GC TEMP ADVANTAGE →
Eugenol-free temporary pack and cement for cases where you need working time and clean removal.
BUY GC FREEGENOL →Brochures and Instructions for Use link directly to GC America so you always get the current revision. Need a document not listed? Ask and we will source it.
US Dental Depot carries G-CEM ONE, G-CEM LinkForce, G-CEM LinkAce, G-CEM Capsules, FujiCEM 2, FujiCEM Evolve, GC Fuji PLUS, GC Fuji I, GC Fuji TEMP LT, GC Temp ADVANTAGE and GC Freegenol.
Pick by restoration, not by habit. FujiCEM 2 for metal, PFM and zirconia crowns with good retention form. G-CEM ONE self-adhesive where you want speed without a separate primer. G-CEM LinkForce when the case is retention-compromised, veneer-thin or all-ceramic.
G-CEM ONE is a self-adhesive dual-cure resin cement. It needs no separate primer for most indications, with an optional adhesive enhancing primer when the case needs more bond.
G-CEM LinkForce is the adhesive cement for the hard cases: veneers, retention-compromised preps and all-ceramic. It uses the full etch-and-bond protocol with G-Multi PRIMER for maximum bond strength.
GC Temp ADVANTAGE and GC Freegenol are eugenol-free. That is important when the definitive restoration will be resin bonded, since eugenol inhibits resin polymerisation.
Yes. Automix cuts waste versus hand mixing. G-CEM LinkAce is a self-adhesive dual-cure in automix, and G-CEM Capsules give consistent mix with no waste on single-unit seatings.
Describe the indication and US Dental Depot comes back with the exact GC item number and lead time. Call 954-874-6325.
Send the indication. We reply with the item number, current price and lead time.