G-Premio BOND is a single-component universal adhesive that runs total-etch, selective-etch and self-etch from the same bottle, one product instead of three protocols on the shelf.
It bonds enamel, dentine, metal, zirconia, alumina and silica-based ceramics without a separate primer, at 3-micron film thickness. That matters on inlay and onlay seating, where a thick adhesive layer stops the restoration seating fully.
G-Multi PRIMER covers the indirect surfaces G-Premio does not reach. Small line items with disproportionate impact on your restoration failure rate.
Each line is its own family on usdentaldepot.com, every shade, viscosity and pack size in one place. Pick the line, then the variant.
Two-component light-cured adhesive built on GC's Dual H-Technology. The primer is hydrophilic, the bond layer is HEMA-free and hydrophobic, and it runs in all three etching modes. GC's current-generation universal adhesive.
BUY G2-BOND UNIVERSAL →
One-component universal adhesive running total-etch, selective-etch and self-etch from the same bottle.
BUY G-PREMIO BOND →
The 7th-generation self-etch predecessor. Single coat, no mixing, no separate etch step - still in the line for practices standardised on it.
BUY G-BOND →
Self-etch adhesive matched to the G-aenial composite family for a single-manufacturer bonding protocol.
BUY G-AENIAL BOND →
METALPRIMER for non-precious and precious alloy surfaces - the step that decides whether a bonded metal restoration debonds at six months.
BUY METAL BONDING PRIMER →
Ceramic Primer for silica-based ceramics. Small item, disproportionate effect on veneer and inlay bond durability.
BUY PORCELAIN BONDING SILANE →Brochures and Instructions for Use link directly to GC America so you always get the current revision. Need a document not listed? Ask and we will source it.
US Dental Depot carries G2-BOND Universal, G-Premio BOND, G-BOND, G-aenial Bond, Metal Bonding Primer and Porcelain Bonding Silane. Each line is its own family on usdentaldepot.com.
G-Premio BOND is a single-component universal adhesive that runs total-etch, selective-etch and self-etch from the same bottle. It bonds enamel, dentine, metal, zirconia, alumina and silica-based ceramics without a separate primer, at 3-micron film thickness.
On inlay and onlay seating, a thick adhesive layer stops the restoration seating fully. G-Premio BOND sits at 3-micron film thickness.
G2-BOND Universal is a two-component light-cured adhesive built on GC's Dual H-Technology. The primer is hydrophilic, the bond layer is HEMA-free and hydrophobic, and it runs in all three etching modes. G-Premio BOND is a one-component universal adhesive running total-etch, selective-etch and self-etch from the same bottle.
METALPRIMER is the Metal Bonding Primer for non-precious and precious alloy surfaces. Ceramic Primer is the Porcelain Bonding Silane for silica-based ceramics. G-Multi PRIMER covers the indirect surfaces G-Premio does not reach.
Yes. G-BOND is the 7th-generation self-etch predecessor: single coat, no mixing, no separate etch step. It is still in the line for practices standardised on it.
Describe the indication and US Dental Depot comes back with the exact GC item number and lead time. Call 954-874-6325.
Send the indication. We reply with the item number, current price and lead time.
