The equipment that turns a milling machine into a working milling cell — cooling, dust extraction, the cabinet it stands on, and the holders that decide which blanks it can actually accept. Twelve items plus the blanks themselves.
Closed-loop water cooling for wet milling. The chiller keeps spindle and coolant temperature stable through a long cut; the cutting fluid is the metal-milling coolant itself.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Dry milling generates fine zirconia dust continuously. Extraction is not an accessory on a dry machine — it protects the spindle, the operator and the surface finish.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Purpose-built stands that carry the machine at working height and store tooling, blanks and consumables underneath. Model-specific — check which cabinet matches your unit.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Holders decide which blank systems your machine can physically accept. Pre-milled abutment holders, Cerec block holders and C-clamp holders each open a different case type.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Titanium Grade-5 pre-milled blanks for GEO / AURUM interfaces, compatible with a wide range of implant systems. Available in 10 mm and 14 mm.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
DEPRAG equipment is 220V. Where only 110V service is available, this transformer bridges the gap for smaller units.
Ships from Boca Raton, Florida. Confirm voltage and machine compatibility before ordering.
These are the two decisions that most often get deferred at purchase and cause problems later.
It depends on the blank system you buy, not the machine alone. Mednetika, Arum/GEO, Cerec blocks and C-clamp systems each need their own holder. Send us the blanks you use and your machine model and we will confirm the holder SKU before you order.
The CW-3000TK is an air-cooled recirculating chiller with high-speed fans — suitable for smaller machinery in a temperate room. The CW-5000TK is the compressor unit and is the right choice for sustained wet milling or a warm lab. Call 954-874-6325 and we will match it to your machine and room.
On a dry machine, treat it as required rather than optional. It captures fine dust at source, which keeps the machine performing and the workspace safe.
Only if your service is 110V. DEPRAG equipment is 220V. The 110V–220V transformer (SKU 485203) covers smaller units — larger equipment needs a real 220V supply. Confirm with us first.
Titanium Grade-5 pre-milled abutment blanks for GEO/AURUM interfaces, in 10 mm and 14 mm. They pair with the pre-mill holders above on metal-capable machines.
Tell us your machine model, your blank system and your room. We will price the cooling, extraction, cabinet and holders that actually fit.
Prefer to talk it through? Call 954-874-6325 — English or Spanish.
