Six milling units across one platform — dry, wet, and dry-and-wet, with or without an automatic disc changer. This page puts every model beside the others so you can see exactly what the extra money buys before you request pricing.
Shown: DEPRAG W5 Pro
5-axis wet & dry · 2.5 kW / 398 Ncm spindle · metal-capable · SKU 485193
Every specification below is taken from the DEPRAG model configuration as supplied to US Dental Depot. Where a price is not published, pricing is configuration-dependent — call or request a quote and we will send a written figure the same day.
| Model | Processing mode | Axes | Disc changer | Spindle power | Spindle speed | Collet / shank | Water cooling | Dust extraction | Cabinet | Time per crown | Price |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D5 Air Free | Dry | 5-axis | No disc changer | Not published | Not published | Not published | N/A — dry machine | Not included — V9 (SKU 485204) | Not included | Not published | Call for Price — 954-874-6325check live price |
| D5 Max | Dry | 5-axis | 8-slot automatic, RFID | 1.8 kW | 60,000 rpm | Ø6 mm | N/A — dry machine | Not included — V9 (SKU 485204) | Not included — base cabinet SKU 485198 | ~1.6× throughput vs manual disc-change | Call for Price — 954-874-6325check live price |
| W4 | Wet | 4-axis | No disc changer | 2.5 kW | 60,000 rpm | Ø6 mm | Water cooling system + 10 L tank included | Not required — wet only | Included | Not published | Call for Price — 954-874-6325check live price |
| W5 | Dry & Wet | 5-axis | No disc changer | 2.5 kW | 60,000 rpm | Ø6 mm | Water cooling system + 10 L tank included | Not included — V9 (SKU 485204) | Included | Not published | Call for Price — 954-874-6325check live price |
| W5 Pro | Dry & Wet | 5-axis | No disc changer | 2.5 kW · 398 Ncm | Not published | Not published | Water cooling system + tank included | Not included — V9 (SKU 485204) | Included | Not published | Call for Price — 954-874-6325check live price |
| W5 Max | Dry & Wet | 5-axis | Automatic, RFID — 10 discs | 2.5 kW HAOZHI | 60,000 rpm | Ø62 mm spindle body | Water cooling system + tank included | Not included — V9 (SKU 485204) | Included | Not published | Call for Price — 954-874-6325check live price |
On “time per crown”: DEPRAG does not publish a per-crown cycle time for these machines, and we will not invent one. Real cycle time depends on the material, the disc, the CAM strategy, the tool set and the margin detail — a zirconia crown and a titanium abutment on the same machine are not comparable. Tell us what you mill and we will give you a realistic figure from labs running the same work. Call 954-874-6325.
All DEPRAG CAD/CAM burs are supplied with 4 mm or 6 mm shanks — the 5-axis machines above take 6 mm. Check the shank column on the bur page before ordering.
Ordered from the simplest dry unit to the highest-throughput dry-and-wet machine.
Best suited to: Dry-only labs with no compressed-air line.
Best suited to: Unattended overnight dry production.
Best suited to: Glass-ceramic and wet work on the lowest entry cost.
Best suited to: One machine covering both dry and wet workflows.
Best suited to: Labs milling titanium and CoCr in-house.
Best suited to: High-volume labs running mixed materials continuously.
The processing mode is the decision that determines everything else: what you can mill, what services the room needs, and what the machine costs to run.
The D5 Air Free mills 5-axis dry with no compressed-air line. Lowest infrastructure cost of any DEPRAG unit.
The D5 Max adds an 8-disc automatic changer plus self-calibration and remote assistance, so a queue runs through the night.
The W4 is the entry into wet milling with a 2,500 W spindle. Accept 4 axes and it is the cheapest route to glass ceramic.
The W5 Pro is the metal-capable unit — 2.5 kW spindle, 5-axis, dry and wet, with self-calibration and remote assistance.
A milling machine is one part of the workflow. These are the DEPRAG lines that surround it.
Zirconia, titanium, CoCr, PMMA/resin and glass-ceramic cutters, with the T-number mapped to every machine that accepts it.
ECO, STD and EXP — the CAM layer that drives DEPRAG machines.
Chillers, the V9 dust collector, base cabinets, blank holders, transformer and cutting fluid.
Milling machine pricing is configuration-dependent — voltage, cabinet, cooling and software all change the number. Rather than publish a figure that will not match your build, we quote in writing. Request a quote or call 954-874-6325 and you get a real price the same day.
DEPRAG milling equipment is 220V. A 110V–220V transformer is available as SKU 485203. Confirm your available supply with us before ordering.
The W-series units are supplied as a set with the water cooling system, tank and cabinet. Configurations vary by model — we confirm the exact component list in writing before anything ships.
Yes. Free shipping to the ground floor with inside delivery, free installation and free training are included on DEPRAG milling equipment.
Most DEPRAG equipment is built to order with an estimated 40-day lead time. Ask us for the current position on a specific model before you commit.
Tell us the materials you mill and the volume you run. We will come back with the right model and a written price the same day.
Prefer to talk it through? Call 954-874-6325 — English or Spanish.
