DIGILUX-Hybrid - DIGILUX SUPER CRYSTAL Hybrid Ceramic Multilayer Disc 98.5mm LT B2 x 22mm Zirc-Na-Noceramic CAD/CAM - # HYB98B2-22
Earn up to 142 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
DIGILUX SUPER CRYSTAL Multilayer Hybrid Ceramic Disc — 98.5mm x 22mm, shade B2
SUPER CRYSTAL is a resin-matrix Hybrid Ceramic Disc for CAD/CAM milling: a nano-silica Ceramic network chemically bonded within a Bis-GMA polymer matrix, sitting between a feldspathic Ceramic and a composite in both handling and behaviour.
Hybrid Ceramic mills fast, needs no sintering or firing, and finishes the same day. Its modulus is closer to dentine than a full Ceramic, so it absorbs load rather than transmitting all of it, and it is kinder to the opposing dentition. It also repairs and adjusts with ordinary composite, which a sintered Ceramic does not.
- Disc diameter: 98.5mm
- Thickness: 22mm
- shade: B2 (VITA classical reference)
- Translucency: LT
- Structure: Multilayer
- Supplied as: 1pk
- Material: Resin-matrix Hybrid Ceramic (nano-silica Ceramic + Bis-GMA)
- Flexural strength: 165 MPa
- Inorganic filler: nano-silica, 47%
- Radiopacity: approx. 50%
- Processing: Mills and polishes — no sintering or firing cycle
- Behaviour: Dentine-like modulus; adjustable and repairable with composite
- Single crowns, inlays, onlays and veneers
- Implant-supported single crowns
- Long-term provisionals in full-mouth rehabilitation
- Milled teeth for printed dentures
- Same-visit chairside restorations
- Cases where a shock-absorbing modulus is preferred
- Wet milling preferred; dry milling is possible at reduced speed.
- Most Disc mills are dry — always choose a slower RPM protocol.
- A PMMA protocol works. On Zirkonzahn machines select the THERAPON material protocol.
- No sintering — mill, finish, polish, seat.
- Adhesive cementation; follow the resin-matrix protocol, not a zirconia one.
- Adjust and repair with conventional composite.
System compatibility: open-system CAD/CAM mills accepting the stated Disc diameter. Confirm your mill accepts a 98.5mm x 22mm blank and that the holder matches before ordering — use Talk to an Expert and tell us your machine.
Technical data, shade charts and processing parameters are lot-dependent for milling blanks. Ask us and we will send the current manufacturer sheet for your exact shade and thickness rather than link a document that may not match your lot.
Attachments
Related Products
Talk to an expert
By submitting you agree to be contacted by US Dental Depot. We never share your details.