• Product type: Nitrogen
• Works with: CURIE PLUS

What resins will it print? ACKURETTA runs an open but validated system. The printers cure 385–405 nm photosensitive resin, and ACKURETTA publish pre-calibrated profiles rather than leaving you to guess settings.

Brands on ACKURETTA's own published compatibility list: CURO (ACKURETTA's own line — Element Model, Ortho Model, Pro Denture, Guide, Crown), VOCO (V-Print), Argen (Model Beige, Light Grey), Rodin (Sculpture, TruModel), Optiprint (laviva, guide, lumina), KeyModel Ultra (Keystone), Mack4D and FLOW (Denture, Hard Splint, C&B). ACKURETTA additionally list BEGO and Pac-Dent among validated partners.

Validated applications: dental models, orthodontic models, surgical guides, splints and night guards, denture bases and teeth, temporary crown & bridge, and permanent restorations on the ceramic-filled materials.

The honest limitation: open does not mean any bottle works. ACKURETTA validate each resin to hold accuracy, mechanical properties and biocompatibility, and state plainly that self-calibrated settings are not supported. The full per-platform list is in the compatibility PDF below — note that some resins are validated only for specific build platforms. Tell us the resin you intend to run and we will confirm it against your exact machine and platform before you order.

Figures published by ACKURETTA and its distributors. Throughput depends on layer height, resin and geometry — treat arch counts as manufacturer figures, not a guarantee for your case mix.

• ✓ Nitrogen removes oxygen inhibition at the surface; ACKURETTA report up to 25% higher mechanical strength.
• ✓ That uplift is what supports Class II applications.
• ⚠ Requires a nitrogen source — cylinder or NFinity generator — which is an additional purchase and an ongoing cost.
• ⚠ A poor seal defeats the inert atmosphere entirely; you get no benefit and no warning.

NFinity — CURING with CURIE PLUS and nitrogen

• N2 COVER Kit 4 CURIE PLUS - 2 x N2 Covers + 2 x Nitrogen tubes #

Building a full workflow? Printer, WASHING station and CURING unit are sold separately and as bundles. Tell us your case volume and we will quote the combination that actually fits it.

• Nitrogen is what enables the higher-strength claim; without it you are CURING in air.
• Confirm your nitrogen source — a cylinder or an NFinity generator — before ordering covers.
• Follow the connection instructions; a poor seal defeats the inert atmosphere.

Build platforms, vats and print screens are model-specific. SOL and SOL PLUS parts are not interchangeable, and this is the single most common ordering error on this range. Confirm which machine you run — the model is on the label at the back of the unit — or send us the serial number and we will confirm the correct part.

• 🗎 CURIE — user manual (PDF)
• 🗎 CURIE — product flyer (PDF)

Documents hosted by ACKURETTA. Need the manual or resin list for a different model in the range? Ask us and we will send it.