SHARK RA #2 Round 22mm - 10pk ( Tungsten Carbide Burs ) - RA#- #200 RA2

Description

The RA #2 Round 22mm - 10pk ( Tungsten Carbide Burs ) - RA#- #200 RA2 is a SHARK Carbide bur, supplied on a RA / CA — Latch-type contra-angle shank, 10pk. SHARK is the value-tier line US Dental Depot stocks for practices that want a dependable everyday instrument without a premium-brand price per unit.

This is a latch-type shank for a slow-speed contra-angle handpiece, used intraorally. Check the shank against your handpiece before ordering — FG, RA and HP are not interchangeable.

Round heads open access and excavate — they cut on the tip and the sides.

Carbide instruments cut — they shear material with defined blades. A Carbide bur is not a polisher, and a dull one should be replaced rather than pushed harder.

From the Manufacturer

Round - 22mm RA Carbide Burs # 115519 - Mfg # RA#2 Features: The RA SHARK Carbide Burs boost superior quality of these Burs is archived by advanced manufacturing techniques using the very lastest equipment backed by 20 strict inspections and control procedures throughout the process. The SHARK RA Round Cross Cut Carbide Burs are available in 4 different sizes.

Our tungsten Carbide Burs not only meet, but greatly exeed stringent ISO,FDA BSI and CE European standards Quantity: Blister of 10 units

Specifications

What You Get

• Supplied as: 10pk
• Genuine SHARK product
• Stocked and shipped from the US Dental Depot facility in Boca Raton, FL

Works With

• Slow-speed latch-type contra-angle handpieces (RA / CA)
• Not an FG friction-grip fit — confirm before ordering
• Ask us and we will verify the shank against your setup

Why You’ll Love It

• Value tier without a mystery supplier. Stocked and backed by US Dental Depot.
• Cost per unit that survives high-volume use — the point of the SHARK line.
• Shank format stated explicitly — no guessing from a photograph.
• We verify the fit before you buy. Send us what you currently use.
• Shipped from Florida with US-based support.

If You Are Looking For…

• The same instrument on a different shank — FG or HP; ask us and we will match it
• A different size in the same geometry — we stock the range; tell us the number
• A diamond equivalent for reduction and finishing
• A premium equivalent — ask us about the SS White version in your size

How It Compares

Alternatives US Dental Depot stocks for the same clinical purpose. Tier and positioning only — no performance figures are claimed for any brand. Tell us your size and we will quote the equivalent in any line above.

Video

Clinical technique reference for this instrument class.

Need Help Choosing?

Tell us your handpiece, size or current product and we will confirm the right match. Call 954-874-6325 or email support@usdentaldepot.com.

Documentation

Technical data and size-matching references for SHARK products are available on request. Call 954-874-6325 or email support@usdentaldepot.com and we will send them.

Manufacturer