Made in Germany · Owner-managed manufacturer since 1925

Renfert Polish 3D Printed Materials starter kit

Article 5104100 · USDD 496245 · the 13 g paste with the five carriers Renfert specifies for each surface

Description

the paste is half of a polishing result; the carrier that delivers it is the other half. This starter kit removes the trial and error by pairing Renfert Polish 3D Printed Materials with the exact instruments Renfert specifies for each surface of a Printed restoration.

the sequence runs from prepolishing to high gloss: the 17 millimeter lamellar top polisher for occlusal and fissure surfaces, the 26 millimeter side wheel for axial and interproximal surfaces, then the Bison brush, leather buff and cotton buff for the high-gloss stages.

Each component is a stocked Renfert article in its own right, so any single item can be replaced as it wears without replacing the kit.

Technical Specifications

What You Get

• 1 x Renfert Polish 3D Printed Materials polishing paste, 13 g (Art. 5104000)
• 1 x Prepolisher 3D top, 17 mm lamellar polisher (Art. 880000) - occlusal surfaces
• 1 x Prepolisher 3D side wheel, 26 mm (Art. 870000) - lateral surfaces
• 1 x Bison polishing brush, 18 mm (Art. 7661000) - high-gloss polishing
• 1 x Leather buff, 22 mm (Art. 2081000)
• 1 x Cotton buff, 22 mm (Art. 2051000)

Works with

• Dental laboratory handpiece
• 3D-Printed restorations in resin or filament - crowns, bridges, temporaries and splints
• Individual components are replaceable from stocked Renfert articles

If You Are Looking For

• the paste on its own for refill - Art. 5104000 (USDD 496246)
• A replacement occlusal prepolisher - Art. 880000 (USDD 496247)
• A replacement axial prepolisher - Art. 870000 (USDD 496248)
• Replacement leather buffs, pack of 5 - Art. 2081000 (USDD 496249)

Why You'll Love it

• Every carrier in the box is the one Renfert names for that surface, so nothing is guessed
• One purchase turns an unproven polishing step into a documented protocol
• Each component is separately stocked, so wear is replaced item by item rather than kit by kit
• Covers the full sequence from prepolishing through final high gloss
• the fastest way to standardise Printed-restoration finishing across a whole team

Technique Video

Renfert GmbH — How to Polish 3D-Printed Restorations - Step-by-Step Guide | Renfert Polish (EN)

Documentation & Resources

• Renfert Polish - manufacturer product page (US)
• Renfert Full Product Catalog (English) - PDF

Manufacturer

Renfert GmbH
Untere Giesswiesen 2, 78247 Hilzingen, Germany
USA: Renfert USA Inc., 3718 Illinois Avenue, St. Charles, IL 60174
Toll free USA: (800) 336-7422 · Germany: +49 7731 8208-0
info@Renfert.com · Renfert.com