HUGE DENTAL - NobilCam MM-4D pre-shaded multilayer zirconia disc, 98.5 millimeter diameter by 14 millimeter working height, shade B3 in the B Shade range. Flexural strength 800-1300 MPa, translucency 43%-55%. Suited to single crowns and short-span. Item 98MM4D14-B3. - # 98MM4D14-B3

NobilCam MM-4D multilayer zirconia disc – 98.5 x 14mm, shade B3

The NobilCam MM-4D disc in shade B3 at a 14mm working height is a pre-shaded, multilayer zirconia blank Engineered for open-architecture CAD/CAM milling. Engineered as a high-performance universal zirconia that holds an ideal equilibrium between mechanical strength, rich esthetics and laboratory productivity across every indication. It delivers the structural security required for long-span restorations and complex full-arch implant frameworks while maintaining excellent milling stability and predictable sintering shrinkage.

shade B3 represents a medium reddish-yellow value with pronounced warmth, making this disc the natural selection for warm-toned dentition where A-family shades read too grey. at 14mm it is dimensioned for single crowns and short-span anterior or posterior bridges — a versatile everyday height that covers the majority of routine lab work.

Key Features

• multilayer gradient structure with a continuous chroma and translucency transition from cervical to incisal — no visible layer banding after milling
• Flexural strength of 800-1300 MPa across the layered profile
• Translucency range of 43%-55%, tuned for structural security across the full indication range
• pre-shaded to VITA-equivalent B3 — no dipping or infiltration step required
• 98.5mm outer diameter with a standard stepped mounting flange for open-system milling units
• 14mm usable working height, providing a versatile everyday height that covers the majority of routine lab work
• Consistent, predictable sintering shrinkage factor supplied on every disc label and batch certificate
• Homogeneous grain structure for clean margin definition and low chipping at thin cross-sections

Key Selling Points

• Removes the shading bench step entirely — mill, sinter, glaze, deliver
• shade B3 arrives production-ready, eliminating the batch-to-batch colour drift that manual infiltration introduces
• Single crowns and short-span anterior or posterior bridges are covered by this single height, reducing the number of disc heights a laboratory must hold
• Full 19-shade VITA-equivalent range plus three bleach shades available across the line, so a laboratory can standardise on one material system
• open-architecture format — no proprietary holder, licence key, or system lock-in
• Shipped direct to the laboratory, protecting turnaround on rush cases

What Makes This Unique

The MM-4D formulation refuses the usual trade-off between strength and appearance. at 800-1300 MPa it carries long-span and implant-supported work that softer esthetic zirconia cannot, while still holding 43%-55% translucency so the result does not read as an opaque framework. in shade B3, which is a medium reddish-yellow value with pronounced warmth, that combination lets one material serve both the anterior esthetic case and the posterior load-bearing unit. The 14mm height extends that reach to single crowns and short-span anterior or posterior bridges.

How It Compares

Against a conventional single-layer pre-shaded blank, this disc removes the flat optical transition that forces technicians to compensate with surface stain. Against a manually infiltrated white blank, it removes the drying and dipping cycle and the shade variance that comes with it. Within the NobilCam line, MM-4D sits at 800-1300 MPa and 43%-55% translucency, while GM3D sits at 700-1200 MPa and 45%-57% — choose MM-4D when the case calls for structural security across the full indication range.

Technical Specifications

Compatibility

Fits open-architecture dental milling machines that accept a 98.5mm stepped-flange disc, including the widely used 4-axis and 5-axis laboratory platforms. Nesting and sintering parameters are configured in the laboratory CAM software using the shrinkage factor printed on the disc label. Verify that the milling unit clears a 14mm blank height before ordering this variant.

What is in The Box

• 1 x NobilCam MM-4D multilayer zirconia disc, 98.5 x 14mm, shade B3
• Sealed protective disc packaging
• Batch label stating lot number and sintering shrinkage factor

Warranty

Covered against manufacturing defects in material and workmanship. Discs are supplied with a lot-specific shrinkage factor; claims relating to fit require the lot number from the disc label. Contact US Dental Depot for warranty details and returns authorisation before shipping any product back.

Support

Technical questions on nesting, shrinkage factor, sintering profiles or shade selection are handled by US Dental Depot at 954-874-6325.

[Works with open-architecture 98.5mm milling systems, laboratory sintering furnaces, and standard CAM nesting software — related searches: NobilCam MM-4D zirconia disc, multilayer zirconia B3, 98.5 x 14mm zirconia blank, pre-shaded b shade zirconia, monolithic zirconia disc B3, CAD CAM zirconia 14mm]