HUGE DENTAL - NobilCam GM3D pre-shaded multilayer zirconia disc, 98.5 millimeter diameter by 25 millimeter working height, shade A1 in the A Shade range. Flexural strength 700-1200 MPa, translucency 45%-57%. Suited to full-arch restorations, implant. Item 98GM3D25-A1. - # 98GM3D25-A1
Earn up to 121 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
HUGE DENTAL — NobilCam GM-3D Gradient multilayer zirconia disc, 98.5 × 25 mm, shade A1
A pre-shaded gradient multilayer zirconia blank for open-architecture CAD/CAM milling of crowns and bridges. HUGE publishes a Prime sintering programme for GM-3D covering crowns and bridges up to 5 units. for longer spans the factory specifies MM-4D, which carries its own greater-than-5-unit programme and a higher strength ceiling.
Description
NobilCam GM-3D is produced with a manufacturing process that combines strength and esthetics in a single disc. The seamless progression of translucency, shade and composition across the layers gives premium esthetics with a continuous cervical-to-incisal transition and no visible layer banding after milling. Special filling technology delivers the gradient in colour, translucency and strength together, so one material covers dentin through enamel. Before pre-sintering, every blank is vacuum-sealed and isostatically pressed, which improves the microstructure of the material. Powder conditioning adjusts the sintering kinetics so the 4Y and 5Y oxide-ceramic layers combine with a predictable, uniform shrinkage. All figures below are the manufacturer’s published values.
Specifications
Translucency: 43–57%
Sintered density: 6.07 ± 0.03 g/cm³
Diameter: 98 mm, standard stepped mounting flange (open system)
working height: 25 mm
shade: A1, pre-shaded — no dipping or infiltration step
Minimum wall thickness: 0.7 mm · minimum connector: 9 mm²
Sintering Programme — HUGE Prime, crowns and bridges up to 5 units
Published by HUGE Dental for Prime-tier MHT, GM and MM-4D. Programme the furnace to this curve and do not remove the framework until it has cooled completely.
| Step | Start °C | End °C | Time (min) | Rate °C/min |
|---|---|---|---|---|
| Step 1 | 20 | 300 | 30 | 9.3 |
| Step 2 | 300 | 1000 | 100 | 7 |
| Step 3 | 1000 | 1200 | 40 | 5 |
| Step 4 | 1200 | 1500 | 110 | 2.7 |
| Step 5 | 1500 | 1500 | 120 | Holding |
| Step 6 | 1500 | 800 | 100 | 7 |
| Step 7 | 800 | Room temperature | Cool naturally | / |
Peak 1500 °C with a 120-minute hold. Furnace temperature fields vary; verify with sintering rings and follow your furnace manual.
Nesting — layer split by disc thickness
| disc | Incisal | Incisal transition | Transitional | Dentin | Restoration height |
|---|---|---|---|---|---|
| 12 mm | 2.4 mm | 1.8 mm | 5.4 mm | 2.4 mm | 8-9 mm |
| 14 mm | 2.8 mm | 2.1 mm | 6.3 mm | 2.8 mm | 10-11 mm |
| 16 mm | 3.2 mm | 2.4 mm | 7.2 mm | 3.2 mm | 11-12 mm |
| 18 mm | 3.6 mm | 2.7 mm | 8.1 mm | 3.6 mm | 13-14 mm |
| 20 mm | 4 mm | 3 mm | 9 mm | 4 mm | 14-15 mm |
| 22 mm | 4.2 mm | 3.3 mm | 9.9 mm | 4.2 mm | 16-17 mm |
| 25 mm | 5 mm | 3.75 mm | 11.25 mm | 5 mm | 19-20 mm |
This disc is the 25 mm row. Line the teeth up with the middle of the block and leave 0.5–1 mm at the incisal end and the cervical edge.
What You Get
1 × NobilCam GM-3D gradient multilayer zirconia disc, 98.5 mm diameter × 25 mm working height, shade A1, supplied with its disc label and batch certificate carrying the lot shrinkage factor.
Works With
open-architecture dry milling units that accept a 98 mm disc with the standard stepped mounting flange — no proprietary holder, licence key or system lock-in. Sinter in a furnace reaching 1500 °C that is used only for zirconia.
If You Are Looking for
Other shades and heights in this same NobilCam GM-3D line are stocked at US Dental Depot — the A-family, B-family and bleach shades in 12, 14, 16, 18, 20, 22 and 25 mm working heights. If your case list runs past 5 units, ask us about NobilCam MM-4D, which HUGE rates to 1200 MPa and publishes a dedicated long-span sintering programme for.
Why You’ll Love It
The shading bench step disappears — mill, sinter, glaze, deliver. Because the shade is Built into the blank rather than infiltrated by hand, batch-to-batch drift from manual dipping is removed, and a lab can standardise on one material system across the shade range instead of stocking several.
Documentation
The manufacturer’s zirconia catalogue — containing the sintering programmes, nesting instructions and material data reproduced above — is published by HUGE Dental. for the current revision, the batch certificate for your lot, or the IFU, contact us and we will send it directly.
US Dental Depot is an authorized distributor of HUGE DENTAL / NobilCam products. Every disc ships factory-sealed with its batch certificate.
US Dental Depot warrants this HUGE DENTAL product for 1 year against manufacturing defects. The warranty does not cover normal wear, consumption in use, milling damage, or a result caused by sintering outside the manufacturer’s published programme.
Product description updated: August 6, 2026
Attachments
Related Products
Talk to an expert
By submitting you agree to be contacted by US Dental Depot. We never share your details.