MIIYEN - Zirc Disc ML 98x20mm 3D A3.5 - # 3DPRML A3.5 98 14
Earn up to 91 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
MIIYEN MIIYEN 3D Pro Multilayer ZIRCONIA — 98.5mm x 20mm, shade A3.5
A pre-shaded multilayer ZIRCONIA disc for CAD/CAM milling. BAOT build the 3D Pro range on a graded crystal structure — 3Y-TZP through the dentin zone, shifting through 4Y to 5Y-TZP at the incisal. The 3Y-rich cervical carries the load and resists fracture; the 5Y incisal gives translucency and is gentler on the opposing dentition. Five pre-shaded layers blend cervical to incisal, so a lifelike gradient comes out of the mill without external staining.
Where it earns its keep: full-contour work you do not want to layer. The shade gradient is already in the puck, so a monolithic crown or a long-span bridge can go from mill to sinter to polish with no ceramic build-up — and you can still layer it if the case demands.
- Disc diameter: 98.5mm
- Thickness: 20mm
- Shade: A3.5
- Supplied as: 1pk
- Manufacturer: BAOT Biological Technology Co., Ltd. — MIIYEN is BAOT’s dental brand.
- Flexural strength: 800–1200 MPa (manufacturer figure)
- Translucency: 42–57% (manufacturer figure)
- Layer structure: 5 natural gradient layers, cervical to incisal
- Crystal gradient: 3Y-TZP dentin → 4Y → 5Y-TZP incisal
- Shade system: 16 classic shades + 4 bleach shades
- Manufacture: adhesive-free
- Anterior and posterior single crowns
- Implant-supported restorations
- Long-span and full-arch bridgework
- Full-contour monolithic restorations
- Optionally layered with ceramic where the case demands
- Sinter to the furnace program your shade and thickness require — follow the shrinkage factor on the disc label, not a remembered value.
- Each batch carries its own shrinkage figure; enter it into your CAM software before nesting.
- Store dry and handle with clean gloves. Contamination before sintering shows up as discolouration after.
System compatibility: Amann Girrbach, Zirkonzahn, vhf, Roland and other open CAD/CAM systems. Confirm your mill accepts this 98.5mm blank before ordering — use Talk to an Expert and tell us your machine.
Technical data, shade charts and sintering or processing parameters are lot-dependent for milling blanks. Ask us and we will send the current manufacturer sheet for your exact shade and thickness rather than link a document that may not match your lot.
Attachments
Related Products
Talk to an expert
By submitting you agree to be contacted by US Dental Depot. We never share your details.