IBO Odontit - IBO 3G TiBase - Non-Engaging Height 3 mm — Titanium Base compatible with ALPHA BIO TEC MULTINEO implant connection, platform CS, collar height 3mm, Non-Engaging. Reference IBO-4402-604. - # IBO-4402-604

3G titanium base — ALPHA BIO TEC MULTINEO

A titanium base is where the digital workflow becomes a physical restoration, and there is very little room for approximation at that junction. This ALPHA BIO TEC MULTINEO TiBase is machined to the implant manufacturer's connection tolerance so the crown you designed on screen is the crown that seats in the mouth. the engaging geometry indexes to the implant's internal anti-rotational feature, making This the correct choice for single-unit restorations where rotational stability is the whole game. Bonded to a zirconia, lithium disilicate, or hybrid ceramic superstructure, it delivers a screw-retained result with a titanium-to-titanium implant interface and no cement line below the tissue.

Key Features

• Precision-machined implant interface held to the original connection tolerance
• Grade 5 titanium alloy (Ti-6Al-4V ELI) for fatigue strength at the screw seat
• Retentive bonding surface engineered for reliable adhesion to zirconia and lithium disilicate
• Engaging configuration for single-unit restorations
• Anodized or machined finish that keeps the emergence profile clean at the tissue margin
• Gingival height of 3mm to match the soft-tissue depth at the site

Key Selling Points

• Supported by every major CAD library, so the design file is a lookup and not a modelling exercise
• titanium-to-titanium contact at the implant, avoiding the wear seen when ceramic meets the fixture directly
• Retrievable screw-retained restoration — no subgingival cement and no cement-related tissue inflammation
• A fraction of the cost of the original-brand base without a change in the connection geometry
• Consistent lot-to-lot machining, which matters when a lab is bonding dozens of units a week

What Makes This Unique

the interface is the product. Anything downstream of a loose or out-of-tolerance connection — micro-movement, screw loosening, marginal bone response — traces back to how accurately the base mates with the implant. This base is cut to the connection's own dimensional envelope rather than to a generic approximation, and that is the difference between a restoration that holds for a decade and one that comes back in eighteen months.

How It Compares

Against an original-equipment titanium base the geometry is equivalent at the implant interface, and the cost difference is significant enough to change the economics of a full-arch case. Against a one-piece custom-milled zirconia abutment, the TiBase keeps metal at the screw seat where ceramic is at its most vulnerable, while still allowing the emergence and contour to be designed in ceramic. Against a stock titanium abutment, the digital route gives per-tooth emergence contours that a stock part cannot.

Technical Specifications

Compatibility

Engineered to interface with ALPHA BIO TEC MULTINEO, platform CS. Verify the platform designation and platform diameter of the placed implant against the specification table above before ordering. where a surgical record is unavailable, a radiographic measurement or a trial fit with the corresponding analog is the reliable way to confirm the connection.

All implant system and connection names are the registered trademarks of their respective owners and are used here solely to identify prosthetic compatibility. This component is a third-party prosthetic part and is not manufactured, endorsed by, or affiliated with the owners of those marks.

What is In the Box

• 1 x titanium base
• 1 x Prosthetic screw (where supplied with the component)
• Reference and lot documentation

Handling & Care

Clean in an ultrasonic bath and steam-sterilize before intraoral use. Do not sandblast the implant-mating surface — abrasion there changes the fit. Air-abrade only the bonding surface, at low pressure, and tighten the prosthetic screw to the implant manufacturer's stated torque with a calibrated driver.

Warranty

Covered against manufacturing and material defects. Contact manufacturer for full warranty terms and duration. Components that have been altered, re-machined, or used outside their stated indication fall outside warranty coverage.

Support

Technical guidance, compatibility confirmation, and documentation requests are handled through US Dental Depot. Reference number IBO-4402-604 when contacting support.

[Works with ALPHA BIO TEC MULTINEO — related searches: titanium base, ALPHA BIO TEC, MULTINEO, dental implant prosthetics, implant compatible components, IBO IBO-4402-604, platform cs]