ENBIO
ENBIO · Class B Steam Autoclaves
ENBIO ENBIO S Class B Autoclave — 2.7 L Chamber
SKU 488629 · ENBIO · ENBIO Group AG, Switzerland
Price promise
WE WILL BEAT ANY FORMAL COMPETITOR QUOTE
Send us a written quote from another US supplier on this exact model and we will beat it. Call 954-874-6325 or use Request a Quote above.
Description
ENBIO S is the compact Class B Autoclave in the ENBIO line: a 2.7 L chamber that turns unwrapped instruments around in 7 minutes, in a cabinet small enough to sit chairside.
It is a Class B unit — fractionated (pulsed) vacuum, which evacuates air from the chamber before the sterilisation phase so steam reaches the inside of hollow and complex instruments as well as wrapped packs. ENBIO states ENBIO S sterilises “all types of instruments suitable for steam sterilization, including hollow and complex instruments, as well as wrapped packs.” No plumbing: it runs from two bottles and a wall outlet.
How Fast — Cycle Times and Realistic Daily Throughput
FAST program (S-class, unwrapped, no drying): 7 min
273°F Class B program (wrapped, with drying): 15 min
250°F Class B program: 45 min
The 15 min wrapped-and-dried cycle is the number that governs a working day: pouches come out sterile and dry, ready to store or use, with no second step. At 15 min per load that is about four wrapped cycles an hour, so a single ENBIO S clears roughly 32 pouches per hour of continuous running. The 7 min unwrapped program exists for the other pattern — one set of instruments needed back immediately between patients.
Throughput figures above are calculated from ENBIO’s published cycle times, not quoted by ENBIO. Real-world rates depend on load preparation, how full each basket is, and warm-up between runs.
What Goes In One Load
Pouches per load: up to 8 (manufacturer figure)
Chamber volume: 2.7 L
Usable tray: 11.2 x 7.5 x 1.3 in
ENBIO rates ENBIO S at up to 8 pouches in one cycle. That is the only load figure the manufacturer publishes. Cassette capacity is not published — whether a given 8-instrument cassette fits depends on its outside dimensions against the 11.2 x 7.5 x 1.3 in tray, so measure your cassette rather than relying on a number. Call 954-874-6325 with the cassette you use and we will check the fit against the tray before you order.
Handpieces and Hollow Instruments
ENBIO S is a Class B Autoclave with fractionated vacuum — the class specifically intended for hollow, lumened and complex loads, which is what makes handpieces sterilisable in the first place. ENBIO does not publish a dedicated handpiece program. Handpieces run on the wrapped Class B cycle. Always follow your handpiece manufacturer’s own reprocessing instructions — lubrication and maximum temperature are set by the handpiece maker, not by the Autoclave.
Programs
3 sterilisation programs.
- FAST (S-class) — 7 min, 273°F, unwrapped, no drying.
- 273°F Class B — 15 min, wrapped, with drying.
- 250°F Class B — 45 min, for lower-temperature loads.
Plus operational features: automatic self-test, User ID, standby mode, and automatic cycle-report logging to USB — every cycle archives itself, so there is no paper log to maintain.
Water, Consumables and Service Intervals
No special liquid and no chemicals. The unit sterilises with pure steam. What it needs is distilled water — ENBIO is explicit that water outside the manual’s parameters is improper operation, so this is not a preference, it is a requirement.
Running consumables and the manufacturer’s service intervals:
- Chamber seal — every 1,500 cycles. ENBIO specifies replacement at this interval and names the part: 14672SHS. It can be fitted by office staff when the complete door kit is ordered.
- Service inspection — every 3,000 cycles, by a certified service technician.
- Magic Filter — recycles feed water in a closed loop, rated by ENBIO at up to 1,000 cycles per 1 litre.
- HEPA filter and feed / waste bottles — replace per the manual.
We stock all of it — part numbers are listed under Works With below.
Specifications
Sterilisation class: Class B, fractionated (pulsed) vacuum
Chamber volume: 2.7 L
Pouches per load: up to 8
Usable tray: 11.2 x 7.5 x 1.3 in
Cycle times: 7 min FAST · 15 min Class B wrapped · 45 min at 250°F
Dimensions (L x W x H): 22 x 9.8 x 6.2 in
Weight: 33 lbs
Power: 2250 W
Power supply: 20-240V / 50-60Hz
Operating pressure: 30.5 psi
Maximum pressure: 35.5 psi
Maximum temperature: 279°F
Noise level: 42 dB
Water: Distilled water; no plumbing required
Cycle records: Automatic logging to USB
Manufacturer: ENBIO Group AG, Oensingen, Switzerland
What You Get
- ENBIO ENBIO S Class B Autoclave, 2.7 L chamber
- Instrument tray
- Feed and waste water bottles with connecting pipe set
- US power cable
- USB drive for cycle reports
- Manufacturer documentation
Pack contents follow the manufacturer’s standard configuration. Confirm the exact contents for your order on 954-874-6325 before purchase.
Works With
- SKU 488631 — Drawer Front + Gasket Kit, Silver — Part 14672SHS. The chamber-seal kit ENBIO names by part number. Manufacturer service schedule calls for seal replacement every 1,500 cycles.
- SKU 488638 — ENBIO Magic Filter — water recycling. Recycles feed water in a closed loop — ENBIO rates it at up to 1,000 cycles per 1 litre.
- SKU 488630 — HEPA Filter, ENBIO S / Pro (OEM). Air-intake filtration. Replace on the manufacturer’s recommended schedule.
- SKU 488639 — Water Bottle Set — feed + waste. The two-bottle set the unit runs on. No plumbing required.
- SKU 488636 — USB Pendrive, 16 GB. Cycle reports write automatically to USB — plug-and-play archiving instead of paper logs.
If You Are Looking For
More or less capacity — the other unit in the line is ENBIO ENBIO Pro, SKU 488628 (5.3 L chamber, 16 pouches, dedicated prion program). Both are Class B with the same wrapped-cycle time; the difference is chamber size, load count, and the prion program.
Keeping it running — the seal kit (SKU 488631) and Magic Filter (SKU 488638) are the two parts that get consumed on schedule. Order them with the unit and the first service interval is already covered.
Documentation
Links go to ENBIO’s own pages. Every URL above was verified live before publication.
Manufacturer
Company: ENBIO Group AG
Address: Eichengasse 3, 4702 Oensingen, Switzerland
US service: service.usa@ENBIO.com · 1-844-362-4687
AUTHORIZED DISTRIBUTORUS Dental Depot is an Authorized ENBIO Distributor
Every ENBIO unit we sell is a genuine, factory-fresh product, sourced through authorized channels and shipped from our own facility in Boca Raton, Florida, with US-based support on 954-874-6325. This matters more than usual on ENBIO equipment: ENBIO’s own warranty terms state the manufacturer is not responsible for devices purchased from unauthorized distributors. Buying through an authorized distributor is what keeps your coverage intact.
Warranty & Guarantee
24-month limited manufacturer warranty (US and Canada). ENBIO covers year one for 12 months or 2,000 cycles, whichever comes first, and year two for a further
12 months or 2,000 cycles, whichever comes first — with the warranty running from your
original invoice date in both tiers. As the authorized ENBIO distributor, US Dental Depot warrants this unit against defects in materials and workmanship for that full term and coordinates service directly with ENBIO’s US service centre (service.usa@ENBIO.com · 1-844-362-4687).Excluded: parts subject to normal
wear and tear, and
consumables — seals, filters, bottles and pipe sets.
Keeping coverage in force: ENBIO requires scheduled paid service — chamber seal replacement every 1,500 cycles (part 14672SHS, SKU 488631, fittable by your own staff with the complete door kit) and a
certified-technician inspection every 3,000 cycles. Running the unit on water outside the manual’s specification also voids coverage — use distilled water only. Full terms are published at
ENBIO.us.
Price promise
WE WILL BEAT ANY FORMAL COMPETITOR QUOTE
Send us a written quote from another US supplier on this exact model and we will beat it. Call 954-874-6325 or use Request a Quote above.
Product description last updated: July 30, 2026