• Product type: Toolkit
• Power: 110 V — confirm your supply before ordering
• Manufacturer item: RS110010171

What resins will it print? ACKURETTA runs an open but validated system. The PRINTERS cure 385–405 nm photosensitive resin, and ACKURETTA publish pre-calibrated profiles rather than leaving you to guess settings.

Brands on ACKURETTA's own published compatibility list: CURO (ACKURETTA's own line — Element Model, Ortho Model, Pro Denture, Guide, Crown), VOCO (V-Print), Argen (Model Beige, Light Grey), Rodin (Sculpture, TruModel), Optiprint (laviva, guide, lumina), KeyModel Ultra (Keystone), Mack4D and FLOW (Denture, Hard Splint, C&B). ACKURETTA additionally list BEGO and Pac-Dent among validated partners.

Validated applications: dental models, orthodontic models, surgical guides, splints and night guards, denture bases and teeth, temporary crown & bridge, and permanent restorations on the ceramic-filled materials.

The honest limitation: open does not mean any bottle works. ACKURETTA validate each resin to hold accuracy, mechanical properties and biocompatibility, and state plainly that self-calibrated settings are not supported. The full per-platform list is in the compatibility PDF below — note that some resins are validated only FOR specific build platforms. Tell us the resin you intend to run and we will confirm it against your exact machine and platform before you order.

• ✓ Plastic scrapers and spatulas sized FOR the vat — the correct tools FOR the job.
• ✓ Filtering resin back into the bottle after a failed print recovers material that would otherwise be waste.
• ⚠ Metal tools improvised from the bench puncture vat film. That repair costs far more than the kit.
• ⚠ Consumables in the kit deplete; keep filters and gloves stocked separately.

Pro tip — cleaning your EQUIPMENT

Pro tip — cleaning a dirty vat

• Starter Tool Kit

Building a full workflow? Printer, washing station and curing unit are sold separately and as bundles. Tell us your case volume and we will quote the combination that actually fits it.

• Use only the supplied plastic tools inside the vat; metal punctures the film.
• Filter resin back into the bottle after a failed print rather than discarding it.
• Keep consumable filters and gloves stocked alongside the kit.

Build platforms, vats and print screens are model-specific. SOL and SOL Plus parts are not interchangeable, and this is the single most common ordering error on this range. Confirm which machine you run — the model is on the label at the back of the unit — or send us the serial number and we will confirm the correct part.

• 🗎 SOL — user manual (PDF)

Documents hosted by ACKURETTA. Need the manual or resin list FOR a different model in the range? Ask us and we will send it.