• Product type: Printer Plus
• Works with: Sol PLUS
• Power: 110 V — confirm your supply before ordering
• Print screen: 12.7 × 21.8 cm
• XY resolution: 45 µm
• Layer height: from 30 µm
• Wavelength: 385–405 nm
• Throughput: 28 full arches vertical / 8 flat, under 4 hours
• Manufacturer item: RS110010241

What resins will it print? ACKURETTA runs an open but validated system. The Printers cure 385–405 nm photosensitive resin, and ACKURETTA publish pre-calibrated profiles rather than leaving you to guess settings.

Brands on ACKURETTA's own published compatibility list: CURO (ACKURETTA's own line — Element Model, Ortho Model, Pro Denture, Guide, Crown), VOCO (V-Print), Argen (Model Beige, Light Grey), Rodin (Sculpture, TruModel), Optiprint (laviva, guide, lumina), KeyModel Ultra (Keystone), Mack4D and FLOW (Denture, Hard Splint, C&B). ACKURETTA additionally list BEGO and Pac-Dent among validated partners.

Validated applications: dental models, orthodontic models, surgical guides, splints and night guards, denture bases and teeth, temporary crown & bridge, and permanent restorations on the ceramic-filled materials.

The honest limitation: open does not mean any bottle works. ACKURETTA validate each resin to hold accuracy, mechanical properties and biocompatibility, and state plainly that self-calibrated settings are not supported. The full per-platform list is in the compatibility PDF below — note that some resins are validated only for specific build platforms. Tell us the resin you intend to run and we will confirm it against your exact machine and platform before you order.

Figures published by ACKURETTA and its distributors. Throughput depends on layer height, resin and geometry — treat arch counts as manufacturer figures, not a guarantee for your case mix.

• ✓ Open validated resin library — CURO plus Argen, BEGO, Keystone, Pac-Dent, VOCO and more, so you are not locked to one supplier's pricing.
• ✓ Over 10 validated biocompatible applications, from models to permanent crowns.
• ✓ Sol prints roughly 3× faster than leading SLA machines, with 54 LEDs and 95%+ light uniformity.
• ⚠ Self-calibrating a resin is explicitly unsupported. Off-list materials are your risk, not ACKURETTA's.
• ⚠ The LCD print screen is a wear part. Budget for replacement — it is consumed by exposure hours, not covered as a defect.
• ⚠ A printer alone is not a workflow. Washing and post-curing are required for biocompatible output, which is why the bundles exist.

Sol PLUS — unboxing and first look

Sol PLUS — Clean Vat function

• Sol PLUS LCD 3D Dental Printer 110v ( INCLUDING VIP CONCIERGE PACKAGE )

Building a full workflow? Printer, washing station and curing unit are sold separately and as bundles. Tell us your case volume and we will quote the combination that actually fits it.

• Confirm your voltage. This is a 110 V unit; do not order it for a 220 V operatory.
• The print screen is a consumable. Ask us for the replacement part number at purchase, not at failure.
• Plan the full workflow — a printer without washing and post-curing does not produce biocompatible parts.

Build platforms, vats and print screens are model-specific. Sol and Sol PLUS parts are not interchangeable, and this is the single most common ordering error on this range. Confirm which machine you run — the model is on the label at the back of the unit — or send us the serial number and we will confirm the correct part.

• 🗎 Sol PLUS — product flyer (PDF)
• 🗎 Sol PLUS — compatible resin list (PDF)
• 🗎 ALPHA AI slicing software — flyer (PDF)

Documents hosted by ACKURETTA. Need the manual or resin list for a different model in the range? Ask us and we will send it.