• Product type: Platform
• Works with: SOL
• Manufacturer item: KT210050106

What resins will it print? ACKURETTA runs an open but validated system. The PRINTERS cure 385–405 nm photosensitive resin, and ACKURETTA publish pre-calibrated profiles rather than leaving you to guess settings.

Brands on ACKURETTA's own published compatibility list: CURO (ACKURETTA's own line — Element Model, Ortho Model, Pro Denture, Guide, Crown), VOCO (V-Print), Argen (Model Beige, Light Grey), Rodin (Sculpture, TruModel), Optiprint (laviva, guide, lumina), KeyModel Ultra (Keystone), Mack4D and FLOW (Denture, Hard Splint, C&B). ACKURETTA additionally list BEGO and Pac-Dent among validated partners.

Validated applications: dental models, orthodontic models, surgical guides, splints and night guards, denture bases and teeth, temporary crown & bridge, and permanent restorations on the ceramic-filled materials.

The honest limitation: open does not mean any bottle works. ACKURETTA validate each resin to hold accuracy, mechanical properties and biocompatibility, and state plainly that self-calibrated settings are not supported. The full per-platform list is in the compatibility PDF below — note that some resins are validated only FOR specific build platforms. Tell us the resin you intend to run and we will confirm it against your exact machine and platform before you order.

Figures published by ACKURETTA and its distributors. Throughput depends on layer height, resin and geometry — treat arch counts as manufacturer figures, not a guarantee FOR your case mix.

• ✓ Small and Medium platforms cut print time substantially — up to 60% and 50% respectively — because there is less area to peel per layer.
• ✓ Machined from solid aluminium with an anodised finish; holds flatness and releases prints cleanly.
• ✓ Swapping platforms lets the next job start while the last is still washing.
• ⚠ Platforms are NOT interchangeable between SOL and SOL Plus. Ordering the wrong one is the most common return on this range.
• ⚠ A smaller platform is faster but caps batch size — you will run more cycles FOR the same output.
• ⚠ A scored or damaged surface loses first-layer adhesion and causes failed prints that look like slicing errors.

Printing with the small and medium build platform

Timelapse — medium vs large build platform

• SOL - Build Platform - Medium

Building a full workflow? Printer, washing station and curing unit are sold separately and as bundles. Tell us your case volume and we will quote the combination that actually fits it.

• Platforms are model-specific. A SOL platform does not fit a SOL Plus. Confirm which machine you run before ordering — this is the most common return on this product line.
• Keep a spare. Swapping platforms lets the next job start while the last one is still being washed.
• Inspect the surface FOR damage; a scored platform loses first-layer adhesion.

Build platforms, vats and print screens are model-specific. SOL and SOL Plus parts are not interchangeable, and this is the single most common ordering error on this range. Confirm which machine you run — the model is on the label at the back of the unit — or send us the serial number and we will confirm the correct part.

• 🗎 SOL — user manual (PDF)
• 🗎 SOL Plus — compatible resin list (PDF)

Documents hosted by ACKURETTA. Need the manual or resin list FOR a different model in the range? Ask us and we will send it.