Every zirconia disc US Dental Depot catalogs, organised by brand, series, thickness and shade, from value posterior blanks to premium anterior ones, from 10 mm singles stock to 30 mm full-arch. Pick the brand, then drill into the series that matches your indication.
Ten brands, each with its own page covering series, thickness ladder, shade coverage and honest trade-offs.
67 SKUs 3D PRO ML
161 SKUs Dental Direkt
108 SKUs NOBILcam
91 SKUs 3D & 4D PRO PREMIUM
158 SKUs ST-PRE / STML / TTML / SHTML
52 SKUs Initial ZR Disk
44 SKUs ZOLID
58 SKUs 4D ML / ST / AT
37 SKUs 4D Multilayer
92 SKUs Lumix 3D ML
Send the mill you run, the shade system you work in and roughly how many discs a month you go through. A USDD lab specialist will shortlist two brands and price them, not ten.
Read live from the US Dental Depot catalog. Price is the range across every SKU in the brand, so compare like-for-like thickness before drawing conclusions from the low end.
| Brand | Lines | SKUs | Series | Price per blank | Thickness | Shades |
|---|---|---|---|---|---|---|
| MIIYEN by BAOT | 3D PRO ML | 67 | 1 | Live price | 14mm – 30mm | 17 |
| VITA | Dental Direkt | 161 | 9 | Live price | 10mm – 30mm | 22 |
| HUGE Dental | NOBILcam | 108 | 2 | Live price | 12mm – 30mm | 19 |
| GUSROM | 3D & 4D PRO PREMIUM | 91 | 2 | Live price | 14mm – 25mm | 16 |
| Aconia | ST-PRE / STML / TTML / SHTML | 158 | 4 | Live price | 12mm – 30mm | 23 |
| GC America | Initial ZR Disk | 52 | 4 | Live price | 12mm – 25mm | 20 |
| Amann Girrbach | ZOLID | 44 | 4 | Live price | 12mm – 25mm | 16 |
| DIGITECH | 4D ML / ST / AT | 58 | 5 | Live price | 14mm – 30mm | 18 |
| UP3D | 4D Multilayer | 37 | 1 | Live price | 14mm – 25mm | 16 |
| LUMIX by Bloomden | Lumix 3D ML | 92 | 1 | Live price | 12mm – 25mm | 20 |
Discs, milling units, sintering furnaces and finishing consumables all ship from the same USDD account. Ask for the package price before you buy them separately.
Honest trade-offs on consolidating your zirconia purchasing across ten brands at one distributor.
We will line your current blanks up shade for shade and thickness for thickness against these ten brands and show you exactly where the money goes.
Six buyer profiles and the brand each one usually lands on.
Aconia ST-PRE and GUSROM 3D PREMIUM are the value-tier lines in the lineup with full shade coverage; compare their live prices at the USDD store.
VITA Dental Direkt DD cubeX2 ML and GC Initial ZR ML ELITE, the two most controlled multilayer gradients USDD carries.
Look at 22–25 mm blanks, and at 30 mm where the job needs it: Aconia, DIGITECH, HUGE Dental, MIIYEN and VITA cube ONE all list 30 mm.
Buy in small counts of 14–16 mm pre-shaded multilayer. UP3D 4D Multilayer is matched to UP3D mills you may already own.
VITA Dental Direkt and Amann Girrbach ZOLID both span monolayer through high-translucency multilayer in one ecosystem.
Test GUSROM or LUMIX against your current sintering profile on a single disc before switching a shade family.
Diameter, thickness, yttria class and gradient, the four variables that decide whether a blank fits your mill, your furnace and your case.
Nine of the ten brands USDD stocks are built on the 98.5 mm blank with a standard step. Thickness is the variable that changes, not diameter, so a disc that fits one open-system mill usually fits the next.
12–14 mm covers single crowns and thin veneers. 16–18 mm is the workhorse for bridges and multi-unit anteriors. 20–25 mm is what you need for full-arch, implant bars and long-span frameworks.
Multilayer (4D / ML / gradient) discs carry shade and translucency transitions already inside the blank, so an anterior crown comes out of the mill closer to final. Monolayer pre-shaded discs cost less and stain up predictably.
Higher yttria content buys translucency and costs flexural strength. High-translucency 4Y/5Y layers suit anteriors; 3Y-TZP high-strength layers belong under posterior and long-span work.
Pre-shaded blanks remove the colouring-liquid step, the drying wait and the shade drift that comes with it. Every brand in this lineup is available pre-shaded across the VITA classical range.
Zirconia is not interchangeable at the furnace. Each brand publishes its own ramp, dwell and cool-down. Running brand A's schedule on brand B's disc is the fastest route to a cracked case.
The mill that cuts it, the furnace that sinters it and the consumables that finish it.
USDD is an authorized US distributor for the brands on this page. Discs, mills, furnaces and finishing consumables ship on one account with one point of contact.
Every count on this page is read from the live USDD catalog. When a shade or thickness is out, we tell you the lead time instead of taking the order and going quiet.
English and Spanish technical support for labs across the US and Latin America, sintering schedules, mill compatibility and shade matching, not just order entry.
US Dental Depot catalogs 868 zirconia SKUs across 10 brands: MIIYEN by BAOT, VITA Dental Direkt, HUGE Dental NOBILcam, GUSROM, Aconia, GC America Initial ZR, Amann Girrbach ZOLID, DIGITECH, UP3D and LUMIX by Bloomden. Each brand has its own page covering series, thickness ladder and shade coverage.
Nine of the 10 brands US Dental Depot stocks are built on the 98.5 mm blank with a standard step. Thickness is the variable that changes, not diameter, so a disc that fits one open-system mill usually fits the next.
12 to 14 mm covers single crowns and thin veneers. 16 to 18 mm is the workhorse for bridges and multi-unit anteriors. 20 to 25 mm is what you need for full-arch, implant bars and long-span frameworks. Thickness across the US Dental Depot lineup runs from 10 mm to 30 mm.
Multilayer discs carry shade and translucency transitions already inside the blank, so an anterior crown comes out of the mill closer to final. Monolayer pre-shaded discs cost less and stain up predictably. Pre-shaded blanks also remove the colouring-liquid step, the drying wait and the shade drift that comes with it.
US Dental Depot's buyer guide points aesthetic anterior labs to VITA Dental Direkt DD cubeX2 ML and GC Initial ZR ML ELITE, the two most controlled multilayer gradients US Dental Depot carries.
Ten brands is a lot to evaluate, and most labs should shortlist two, not ten. Sintering schedules are brand-specific, so every brand added is another furnace program to manage. A US Dental Depot lab specialist will shortlist two brands for your mill and case mix.
No. Zirconia is not interchangeable at the furnace. Each brand publishes its own ramp, dwell and cool-down, and running one brand's schedule on another brand's disc is the fastest route to a cracked case. Ask US Dental Depot for the published schedule for the exact series and it will be sent before you order.
Tell us your mill, your shade system and your monthly disc volume. A USDD lab specialist will come back with pricing, stock and lead time within one business day.
A USDD lab specialist will reach out within one business day with pricing, availability and a shade-for-shade comparison. No obligation.
