IBO Odontit - IBO Lock-Attach Abutment - Height 3 mm — Lock-Attach Abutment compatible with BIOHORIZONS TAPERED PRO CONICAL implant connection, platform RP, platform diameter 3.8mm, collar height 3mm. Reference IBO-4902-903. - # IBO-4902-903

Lock-Attach abutment — BIOHORIZONS TAPERED PRO CONICAL

Overdenture retention is a balance between holding the prosthesis still and letting the patient remove it without a struggle. This Lock-Attach abutment for BIOHORIZONS TAPERED PRO CONICAL at 3mm gingival height carries a resilient stud attachment that allows the denture to rotate slightly under function while staying firmly seated. retention is set by the insert colour rather than by the abutment, so the same abutment serves a patient whose grip strength or tissue tolerance changes over time — you swap a nylon insert chairside instead of remaking the case.

Key Features

• Resilient stud attachment permitting physiological rotation of the Overdenture under load
• retention level adjustable chairside through colour-coded nylon inserts
• Titanium alloy body with a hardened, wear-resistant retentive head
• Low vertical profile that preserves interocclusal space for the denture teeth
• Self-aligning geometry that tolerates the implant divergence found in most retrofit cases
• 3mm gingival height matched to the soft-tissue depth at the site

Key Selling Points

• Transforms an unstable complete denture into a retained prosthesis in a single appointment
• retention re-tuned by replacing an insert — minutes of chair time, not a laboratory remake
• Far lower cost and complexity than a bar-retained Overdenture with comparable patient satisfaction
• Hygiene is straightforward, which matters for the population most often treated with overdentures
• Two implants and two attachments are enough to change how a patient eats

What Makes This Unique

the retention is designed to be consumable. Nylon inserts wear, and that is intentional — the wear happens in a part that costs very little and is replaced in minutes, rather than in the titanium abutment or the implant itself. Over a ten-year service life This is the difference between routine maintenance and repeated remakes.

How it Compares

Against a bar-retained Overdenture, stud attachments cost less, are simpler to clean, and do not require the implant parallelism a bar demands. Against a magnetic attachment they deliver substantially higher retention and are not vulnerable to corrosion at the magnet. Against ball attachments the resilient nylon insert gives a more forgiving response to divergent implants and a wider range of adjustable retention values.

Technical Specifications

Compatibility

Engineered to interface with BIOHORIZONS TAPERED PRO CONICAL, platform RP, platform diameter 3.8mm. Verify the platform designation and platform diameter of the placed implant against the specification table above before ordering. Where a surgical record is unavailable, a radiographic measurement or a trial fit with the corresponding analog is the reliable way to confirm the connection.

All implant system and connection names are the registered trademarks of their respective owners and are used here solely to identify prosthetic compatibility. This component is a third-party prosthetic part and is not manufactured, endorsed by, or affiliated with the owners of those marks.

What is In the Box

• 1 x Lock-Attach abutment
• 1 x abutment screw (where supplied with the component)
• Reference and lot documentation

Handling & Care

Torque to the implant manufacturer's specification. Seat the black processing spacer during pick-up to keep acrylic out of the retentive undercut, then exchange it for the working retention insert. Review insert wear at each recall and replace when retention drops.

Warranty

Covered against manufacturing and material defects. Contact manufacturer for full warranty terms and duration. Components that have been altered, re-machined, or used outside their stated indication fall outside warranty coverage.

Support

Technical guidance, compatibility confirmation, and documentation requests are handled through US Dental Depot. Reference number IBO-4902-903 when contacting support.

[Works with BIOHORIZONS TAPERED PRO CONICAL — related searches: Lock-Attach abutment, BIOHORIZONS, TAPERED PRO CONICAL, dental implant prosthetics, implant compatible components, IBO IBO-4902-903, platform rp, 3.8mm platform]