IBO manufactures the LOCK-ATTACH Closed Tray Transfer as part of the LOCK-ATTACH overdenture attachment system. Used in the Impression step of the LOCK-ATTACH workflow when the clinician selects the Closed-Tray (pick-up) Impression technique. The Transfer captures the LOCK-ATTACH abutment's geometry in the Impression for accurate cast pouring.

This reference, HE-41920, integrates into the LOCK-ATTACH workflow alongside the LOCK-ATTACH Abutments, Titanium Female Housing (HE-41918), Retention inserts, and analog.

The LOCK-ATTACH Closed Tray Transfer is selected at the appropriate step in the overdenture rehabilitation workflow — from initial Impression through laboratory fabrication and chairside delivery. Refer to IBO LOCK-ATTACH workflow documentation for step-by-step protocol.

This component integrates into the IBO LOCK-ATTACH overdenture attachment system, compatible across all LOCK-ATTACH platforms (Internal Hex, Conical Reactive, Multiunit).

IBO LOCK-ATTACH titanium components are machined from medical-grade Ti-6Al-4V ELI titanium, Grade 5, in compliance with ASTM F136 and ISO 5832-3. Retention inserts are manufactured from medical-grade silicone formulations validated for intra-oral use.

Titanium components are finished with a polished/machined surface at the gingival emergence for soft-tissue compatibility, and tightly toleranced connection geometry at the implant interface to ensure prosthetic passivity and seal integrity.

All materials and processes are subject to full traceability from raw material to final validation.

IBO LOCK-ATTACH components are supplied in the manufacturer's validated condition for clinical use. Follow the package insert and IBO Instructions for Use for handling, storage and torque protocol. Do not modify the component geometry or surface in any way; doing so compromises the prosthetic interface and the regulatory clearance.

Single-use device. Single patient, single procedure. Discard unused components per local biohazard regulations.

IBO operates under ISO 13485:2016 quality management for the manufacturing of medical devices, holds the AEMPS Spanish Agency of Medicines and Medical Devices licence, and every IBO component carries the CE marking MDR, assessed by a Notified Body.

Five quality foundations apply to this component: