DEKEMA has built ceramic furnaces in Germany since the 1930s. Its Austromat press range runs from the entry 644 (single-piston, ambient-pressure pressing) through the multi-stamp 654 to the connected flagship 654i G2 (IoT, 10.4" touchscreen, quality management).
Multi-stamp pressing with a 10.4" touchscreen, IoT/remote control and quality-management logging — DEKEMA's most advanced press furnace.
Three combi furnaces that both fire and press lithium-disilicate and pressable ceramics. Same German build, three levels of pressing technology and control.
Entry combi furnace — fires like the 624, then presses with a patented single-piston, ambient-pressure system (no compressed-air line). Presses rings up to 70 mm under vacuum.
Multi-stamp combi — electromechanical upward pressing for multi-color, multi-ingot work in one ring. Closed chamber, no cold spots, mineral-fiber insulation.
Flagship i-series — multi-stamp pressing plus a 10.4" touchscreen, IoT / remote control, AutoDry and quality-management logging for connected labs.
Where the three Austromat press furnaces differ. Figures we could not confirm with DEKEMA are marked “Contact us” rather than estimated.
| Spec | Austromat 644 | Austromat 654 | Austromat 654i G2 |
|---|---|---|---|
| Tier | Entry / best value | Mid · multi-color | Flagship · connected |
| Function | Fire + press combi | Fire + press combi | Fire + press combi |
| Pressing system | Single-piston, ambient pressure | Multi-stamp, electromechanical | Multi-stamp, electromechanical |
| Compressed-air line | Not required | Contact us | Contact us |
| Display / control | 7.5" touchscreen | 7.5" touchscreen | 10.4" touchscreen |
| IoT / remote control | — | — | Yes |
| Quality management / logging | — | — | Yes |
| Multi-color / multi-ingot ring | — | Yes | Yes |
| Max temperature | up to 1200°C | up to 1200°C | up to 1200°C |
| Best for | Labs wanting press capability at the lowest entry cost | Labs doing multi-color / multi-ingot pressed work | Connected / multi-site labs needing monitoring & QM |
| At US Dental Depot | View 644 → | View 654 → | View 654i G2 → |
An honest read on each Austromat so you buy the right one — not the most expensive one.
Three quick profiles. Not sure? Tell us your workflow and we’ll spec it.
You want reliable DEKEMA pressing at the lowest entry point and don’t need a compressed-air line.
You press multi-color or multi-ingot rings and want multi-stamp pressing without the connected-flagship cost.
You run several locations and want IoT/remote control, QM logging and consistent programs across the group.
We sell, install and support DEKEMA across the US. Tell us your workflow and we’ll spec the right Austromat.
Boca Raton, FL based — US install support, training and after-sales for your DEKEMA Austromat.
Competitive pricing on the 644, 654 and 654i G2 with financing options for labs of any size.
We quote only specifications confirmed with DEKEMA — no estimated or invented figures, ever.
Talk to a US Dental Depot specialist about the Austromat 644, 654 or 654i G2 — pricing, install and training included.
A USDD expert will reach out within 24 hours with a tailored recommendation, pricing and install timeline. No obligation.
